Eclipse Repeater/Base Station
Following an extensive survey of user requirements, high reliability and superb performance were combined with many unique features to produce a superior, user friendly product.
Fully integrated 100% duty cycle, 25 – 100 watts base/repeater stations in the range from 66MHz to 900MHz. Various configurations of racks are available including floor saving wall mount cabinets.
| • Exceptional systems performance. |
| • Modular construction with independent Receivers and Transmitters. This allows split RX and TX racking for convenient connection to multicouplers etc. |
| • Easily configured for Duplex, Simplex, Trunked or link applications. |
| • Exciters can be used alone for 1-25 watt applications. |
| • Separate High Power Amplifiers can be added for 25-150 watt output. |
| • Transmitter power adjustable over a wide range to meet local licensing requirements. |
| • Synthesized design with programming by IBM compatible PC through front panel RS232 port on each Receiver and’Transmitter. |
| • 100 channel capacity. |
| • Individually programmable CTCSS with squelch tail elimination for each channel. |
| • Programmable processor controlled repeater hang time. |
| • Internal links for flat or emphasised audio response. |
| • Wide Receiver and Transmitter frequency spreads. |
| • The 19" rack module positions can be simply coded to automatically select channel and CTCSS tones. |
| • All modules mate with readily available D range connectors. |
| • DCS compatible without modification. |
| • Direct FSK data transmission options are available for paging and data link applications. |
| • Balanced 4 wire 600 Ohm and Unbalanced audio I/0. |
| • Separate sub-audible ports allow tones and data to be repeated without regeneration, or for easy connection to tone panels. |
| • Isolated DC loop for PTT and COR functions. |
| • Built in diagnostics of low supply voltage, power out, reverse power, receive signal strength, VCO voltage, channel information, squelch open/close, CTCSS, noise and carrier squelch. |
| • Remote monitoring, channel change and programming through RS232 port. |
| • Front panel display of alarm functions. |
| • System monitoring and service made easy with "TecHelp" software. |
| • 20 mSec TX/RX switching time for efficient data transmission. |
| • Carrier adjustable squelch from -140 to -70 dBm. |
| • Low signal alarm adjustable -140 to -70 dBm for point to point links etc. |
| • Signal strength adaptive noise squelch virtually eliminates squelch tail on signals over 2 uV. |
| • Operational over temperature range -30ºC to +60ºC. |
| • Automatic protection with power reduction at high VSWR and temperature. |
| • All external preset controls are multi-turn potentiometers. |
| • Simulcast and Voting compatible. |
| • Monitor speaker included in Receiver. |
| • All modules operate from 13.8 Vdc (nominal 12v) supply. |
| • Fully rated linear Power Supply available. |