10kW HF Directional Coupler

10kW HF Directional Coupler 2017-01-11T09:31:42+00:00

HFC10-26

The HFC10-26 is a wide band directional coupler for the HF band.

The coupler uses ferrite transformer techniques resulting in an extremely small compact device for permanent installation or for field measurement purposes.

Output samples of forward and reverse power flow are provided. Being effectively a “dual” coupler the reverse signal is largely independent of the load on the forward port (and vice versa). Built in load resistors dissipate any unterminated coupled power.

N.B. at 10kW the forward output signal is 25W.

*The coupler is effective over a very much wider frequency range with a small degradation in performance. Calibration charts can be supplied for those out of band frequencies, where for example, measurement of harmonics is desired.

HFC10-26 - 10kW HF Directional Coupler


Technical Specs. 
Frequency:2 - 32MHz. full specification. The coupler is effective over a very much wider frequency range with a small degradation in performance. Calibration charts can be supplied for those out of band frequencies, where for example, measurement of harmonics is desired
Power Rating:10 kW continuous and peak
Max. VSWR:2.5 : 1
Insertion Loss:< 0.1 dB
Return Loss (matched load)> 26.5 dB
Coupling Ratio:-26 dB +/- 0.5 dB
Connectors:Main line – 7/8″ or 1 5/8″. Coupled line -‘N’ female
Forward/Reverse discrimination:> 30 dB

All specifications are that of typical performance.