HF50 Series – 5kW HF Wide Band Antenna Matching Transformer
The HF50 5kW series are solid encapsulated and suitable for installation in any orientation.
The transformers are housed in a heavy duty cast aluminium case, vacuum impregnated with epoxy resin and fully hermetically sealed for any military or commercial environment.
- Wide band 1.5 to 32 MHz
- 5 kW average, 20kW Peak
- All weather solid encapsulated
- Heavy duty cast aluminium case
High purity alumina ceramic insulators with arcing horns are fitted as standard and an internal static drain to earth provides additional protection against lightning induced EMF’s.
A wide selection of unbalanced and balanced impedance ratios are available to complement most antenna configurations and enquiries for non-standard arrangements are welcome.
The HF50 is a unit of the highest quality and reliability.
Please contact us for a quote or for more information
|Balanced Impedance (ohm)|
|Unbalanced impedance (ohm)||50||75||100||200||300||370||450||600|
|Frequency:||1.5 - 32 MHz|
|Impedance:||See table above|
|Power:||5 kW average, 20 kW peak|
|Insertion loss:||Less than 0.3 dB|
|VSWR:||Less than 1.2:1 (2 - 30 MHz), Less than 1.3:1 (1.5 - 32 MHz)|
|Balance ratio:||Greater than 26 dB|
|Load VSWR:||2.5:1 max.|
|Coaxial connectors:||7/8"EIA (Others on request)|
|Balance terminals:||Alumina ceramic M10 thread|
|Temperature range:||-40ºC to +55ºC|
|High voltage protection:||Arcing horns and internal static drain|
|Configuration:||Cast aluminium case (LM25). Hermetically sealed. Epoxy paint finish.|
|Shipping dimensions:||490 x 410 x 390 mm approx.|
All specifications are that of typical performance.