3 and 5 Port Low Signal Hybrid Splitters

A series of very broad band hybrid transformers for signal splitting, combining or for laboratory measurements where high isolation is required. Other connectors available on request.

All specifications under matched load conditions. PCB mounted units are also available upon request.

MHFH2-RX – 3 Port Low Signal Hybrid SplitterMHFH2 – RX – A MHFH2 – RX – B
Frequency50 kHz – 50 MHz 10 kHz – 32 MHz
Power2 x 2 watts 2 x 2 watts
Isolation>35 dB >35 dB
Insertion Loss < 0.5dB < 0.5dB
VSWR<1.2: 1 <1.2: 1
Balancing Loads InternalInternal
Temperature-40°C to +55°C -40°C to +55°C
Connectors‘N’ BNC ‘N’ BNC
ConfigurationCast aluminium box, 50 x 50 x 30mm solid encapsulation. Cast aluminium box, 50 x 50 x 30mm solid encapsulation.
MHFH4-RX – 5 Port Low Signal Hybrid SplitterMHFH4 – RX – A MHFH4 – RX – B
Frequency50 kHz – 50 MHz 10 kHz – 32 MHz
Power4 x 1 watts 4 x 1 watts
Isolation>30 dB >30 dB
Insertion Loss < 0.5dB < 0.5dB
VSWR<1.2: 1 <1.2: 1
Balancing Loads InternalInternal
Temperature-40°C to +55°C -40°C to +55°C
Connectors‘N’ BNC ‘N’ BNC
ConfigurationCast aluminium box, 120 x 60 x 30mm solid encapsulation. Cast aluminium box, 120 x 60 x 30mm solid encapsulation.

Download the technical data sheet for this product

The data sheet contains:

  Complete technical specifications, including extend heights, vertical head load weight, max wind speed tolerances, and more
  Mounting options
  List of typical applications
  Full range of accessories

Contact our sales team

Want to learn more about this particular SMC mast? Or perhaps unsure about which mast in our range is most suitable for your needs? Contact our friendly and knowledgeable sales team today. They will be able to advise you on the best solution for your requirements.