Contact Us
NX Series Telescopic Pneumatic Masts

NX Series Telescopic Pneumatic Masts

The NX Series will support larger head loads and should be considered as being the maximum size necessary for general use.

The NX Series of pneumatic telescopic masts (Hilomast) has a base section diameter of 152mm and is pneumatically operated by air compressor.

Although the NX Series can be used for portable applications it is primarily designed for vehicle installation, either bracketed to the rear, or mounted through the vehicle roof. Models NX18, NX25 and NX30 can be mounted onto the roof of a vehicle in a sliding carriage. The carriage slides rearwards and the mast is then tilted and clamped in the vertical position. All masts in this NX Series can be trailer mounted.

The NX30 has a top section diameter of 50mm for attaching the antenna. All other NX masts have a top spigot of 50mm diameter x 130mm long.

The table below only shows a small selection of possible mast configurations. Due to the modular design of all Hilomast pneumatic masts we are able to offer masts in custom sizes, with or without locking collars, and in various colors and finishes. Please contact us for a quote or for more information on what we can offer.

Heavy duty
Pneumatic
Portable
Vehicle mounted
Mast
Height Extended (m)
Height Retracted (m)
No. of Sections
Diameter of Top Section (mm)
Vertical Head Load (kg)
Max. Wind Speed Unguyed (kph)
Max. Wind Speed with Top Guys (kph)
Top Guy Ref. No. inc. Stakes
Basic Weight of Mast (kg)
NX8
7.6
1.91
7
76
50
155
155
NUG/6GS
50
NX10
10.1
2.51
6
89
50
120
120
NUG/7GS
60
NX14
13.6
2.64
8
63
35
92
95
NUG/5GS
70
NX18
18.5
4.32
6
89
30
70
83
NUG/10GS
93
NX25
25
4.44
8
63
20
52
80
NUG/9GS
110
NX30
29.8
4.57
9
50
14
44
75
NUG/8GS
120

    Speak to one of our team

    Unsure about which SMC product is most suitable for your needs? Contact our subject matter experts today. They will be able to advise you on the best solution and whether a custom design is required.


      Looking for a different mast?

      NX Series Telescopic Pneumatic Masts

      The NX Series will support larger head loads and should be considered as being the maximum size necessary for general use.

      NY Series Telescopic Pneumatic Masts

      The NY Series of masts is for special applications where high head loads are required or where maximum directional stability is necessary.

      NL Series Telescopic Pneumatic Masts

      The NL Series of pneumatic telescopic masts (Hilomast) has a base section diameter of 127mm and is pneumatically operated by air compressor.

      NK Series Telescopic Pneumatic Masts

      The NK Series of pneumatic telescopic masts (Hilomast) have a base section diameter of 102mm and are pneumatically operated with either a manual footpump or small air compressor.

      NH Series Telescopic Pneumatic Masts

      The NH Series of telescopic pneumatic masts have a base section diameter of 89mm and are pneumatically operated with either a manual foot pump or small air compressor.

      SWIFT Mast Series

      Using the SMC designed Quick Clamp Collar, the SWIFT series of push up and telescopic pneumatic masts have been designed to be lightweight & economical.

      HD Series Telescopic Pneumatic Masts

      The HD Range (Heavy Duty Mast) of Pneumatic Telescopic Masts is the largest, most rugged in the Hilomast portfolio.

      Trailer Mast – Up to 30m

      Galvanised steel construction and single axle cross beam suspension for transporting masts up to 30m.

      Trailer Mast – Up to 12m

      This trailer mounted Telescopic mast system weighs only 450kg and can be easily towed by a small saloon car.