2 x 10 kW Multicouplers

2 x 10 kW Multicouplers2018-05-16T15:08:46+00:00

Transmitter multicouplers utilising low loss filter networks enable multiple transmitters to work into a common antenna. Computer aided design techniques provide optimum performance from passive LC circuits which allow transmitters to work at close separations of 40%, 20% or optionally 15%.

System losses are low, typically less than 0.3 dB and rejection of the adjacent transmitter greater than 30 dB.

HFM2-10KW_Multicoupler


Technical Specs. 
Frequency:0.1 - 32MHz
Impedance:50 Ohms
VSWR:<1.2: 1 (matched loads)
Insertion loss:<0.3dB (matched load)
Isolation:>30dB (matched load)
Load VSWR:3:1 max
Weight:250kg approx
Notch width:15%, 20%, 40% of crossover frequency
Cross cover frequency:Notch centre to be specified between 3-18MHz (lower notch centres available)
Environment:Outdoor unprotected -40ºC to +55ºC. Silicone oil cooled natural convection
Connectors:1 5/8", 3 1/8" EIA
Power:2 input channels each 20 kW average (40kW peak) 1 output channel 40 kW average (80kW peak)

All specifications are that of typical performance.

Download Spec Sheet/information PDF