Transmitter multicouplers utilising low loss filter networks enable multiple transmitters to work into a common antenna. Computer aided design techniques provide optimum performance from conventional LC circuits which allows transmitters to work at close separations of 40%, 20% or optionally 15%.
System losses are low, typically less than 0.3 dB and rejection of the adjacent transmitter above 30 dB. The HFHM2-5 series are suitable for 19” rack mounting and do not require additional forced air cooling.
Models can be supplied with various notch widths and we will be pleased to advise on the most economical solution to your problems.
|Frequency:||0.1 - 32MHz|
|VSWR:||<1.2: 1 (matched loads)|
|Insertion Loss:||<0.3dB (matched load)|
|Isolation:||>30dB (matched load)|
|Load VSWR:||3:1 max|
|Notch Width:||15%, 20%, 40% of cross over frequency|
|Cross Cover Frequency:||Notch centre to be specified between 3-18MHz (lower notch centres available)|
|Environment:||Outdoor unprotected -40°C to +55°C natural convection Silicone oil cooled natural convection|
|Connectors:||7/8", 1 5/8" EIA, LC|
|Power:||2 input channels each 20 kW average (40kW peak) 1 output channel 40 kW average (80kW peak)|
All specifications are that of typical performance.
Download Spec Sheet/information PDF